The Chelsea 890 Series Power Take-Off, part number 890RHFJW-B5AF or 890RHFJWB5AF, is a hydraulic hot-shift PTO engineered specifically for Allison 3000 MD and 4000 HD Series transmissions. It mounts via a 10-bolt pattern and uses an SAE C ("XS") output shaft with Wet Spline lubrication to extend PTO and pump shaft life under demanding duty cycles. The one-piece main shaft eliminates input splines between the PTO body and output extension. The clutch sits at the rear of the housing, tucking the gear section tightly against the transmission and relocating the pump flange to the rear for improved frame-rail clearance. Continuous torque rating reaches 670 ft-lb, with shaft power rated at 64 HP at 500 RPM and 128 HP at 1,000 RPM. Common applications include aerial trucks, fire and rescue trucks, refuse trucks, and truck cranes. Call us to confirm proper fit for your specific Allison transmission configuration.
Features
Fits Allison 3000 MD and 4000 HD Series transmissions via 10-bolt mounting
Hydraulic PowerShift (hot-shift) engagement
SAE C ("XS") output with Wet Spline lubrication to extend PTO and pump shaft life
One-piece main shaft eliminates input splines between PTO body and output extension
Clutch located at rear of housing for improved pump and frame-rail clearance
Continuous torque rating up to 670 ft-lb; shaft power 64 HP at 500 RPM, 128 HP at 1,000 RPM
Tech Specs
- Transmission Application: Allison 3000 MD and 4000 HD Series
- Product Series: 890
- Mounting Type: 10-Bolt
- Shift Type: Hydraulic PowerShift (hot-shift)
- Output Shaft Type: SAE C ("XS") Output
- Outlet Flange Type: SAE C
- Lubricant/Output: Wet Spline
- Continuous Torque Rating: 670 ft-lb (check application pages for actual torque ratings)
- Intermittent Torque Rating: 501+ lb-ft
- Output Power: 56+ HP
- Shaft Power: 64 HP at 500 RPM, 128 HP at 1,000 RPM
Additional Information
The Chelsea 890 Series is a single-unit PTO, not a PTO paired with a bolt-on extension. Its one-piece shaft design removes the input splines that conventional extended-reach units rely on, reducing potential wear points. The housing and gear section mount flush to the transmission side, while the clutch assembly at the rear positions the pump output flange behind the transmission for clearance between the pump and the frame rail. This geometry suits installations where a standard side-mount PTO cannot provide adequate pump spacing, including aerial bucket trucks, fire and rescue pumpers, refuse packers, and truck-mounted cranes. The 890 Series accommodates Allison 3000 and 4000 transmissions configured with or without a cooler, retarder, or both.Parts manual and diagrams: Chelsea 890 Series PTO parts list with prices