The Chelsea 252GDHVX-B51116 or 252GDHVXB51116 is a 252 Series Power Take-Off assembly with hydraulic shift and a 6-bolt mounting configuration. It mounts to Allison and RAM automatic transmissions and delivers up to 25 HP (20 kW) of output power. The 1-inch round output shaft with keyway drives auxiliary equipment at 11 HP at 500 RPM and 23 HP at 1,000 RPM. Intermittent torque rating for the 252 Series runs 120 lb-ft (163 Nm); verify your specific application torque on the Chelsea application pages. An integrated cartridge valve with a single hose connection simplifies installation, and weather-tight electrical connectors protect the hydraulic shift circuit. The housing is sized to pass through a floor access panel without dropping the exhaust system. Pro Gear and Transmission sells genuine Chelsea parts - call us to confirm proper fit for your application.
Features
Hydraulic shift with single hose connection and integrated cartridge valve
6-bolt mounting for Allison and RAM automatic transmissions
1-inch round output shaft with 1/4-inch key
Shaft power: 11 HP at 500 RPM, 23 HP at 1,000 RPM
252 Series intermittent torque: 120 lb-ft (163 Nm) - verify on application pages
Weather-tight electrical connectors and Controlled Compression Interface Gasket
Tech Specs
- Shift Type: Hydraulic
- Mounting Type: 6-Bolt
- Output Shaft Type: 1" Round with 1/4" Key
- Transmission Fitment: Allison, RAM
- Output Power: 25 HP (20 kW) maximum
- Shaft Power: 11 HP (9 kW) at 500 RPM, 23 HP (17 kW) at 1,000 RPM
- Intermittent Torque (252 Series): 120 lb-ft (163 Nm) - check application pages for actual torque ratings
Additional Information
