The Chelsea 267XDKVP-M3GH or 267XDKVPM3GH is a constant mesh power take-off from the Chelsea 267 Series, built on a 10-bolt mounting pattern and designed to fit Allison automatic transmissions. The output shaft is a 1-1/4" round shaft with key. Intermittent torque capacity for this series runs 301-400 lb-ft (401-500 Nm), with a series-rated peak of 335 lb-ft (454 Nm) - verify actual torque rating against your specific application pages. Shaft power output is rated at 32 HP at 500 RPM and 64 HP at 1,000 RPM, with the series capable of 56+ HP total output. The 267 Series is suited for refuse, snow and ice, yard jockey, and aerial applications requiring continuous power delivery to load-sensing piston pumps. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
10-bolt mounting pattern fits Allison automatic transmissions
Constant mesh shift type - non-shiftable design suited for continuous pump drive
1-1/4" round output shaft with keyway
Intermittent torque range: 301-400 lb-ft (401-500 Nm) series-rated; check application pages for actual torque ratings
Shaft power: 32 HP at 500 RPM, 64 HP at 1,000 RPM
360-degree rotatable flanges for improved installation clearance
Wet spline or greaseable shaft options available to extend PTO and pump shaft service life
SuperTorque gear option provides up to 20% additional torque capacity over standard 267 Series
Tech Specs
- Mounting Type: 10-Bolt
- Shift Type: Constant Mesh
- Transmission Manufacturer: Allison
- Output Shaft Type: 1-1/4" Round with keyway
- Intermittent Torque: 301-400 lb-ft (401-500 Nm); series peak 335 lb-ft / 454 Nm - check application pages for actual torque ratings
- Output Power: 56+ HP (41-50 kW)
- Shaft Power: 32 HP at 500 RPM, 64 HP at 1,000 RPM (24 kW at 500 RPM, 48 kW at 1,000 RPM)
- Continuous Operation: Yes, with 30% de-rating
Additional Information
