Features
Hydraulic (PowerShift) hot shift operation for Allison automatic transmissions with 10-bolt aperture
Ductile iron bearing cap, 117% stronger than gray iron, with o-ring seal configuration between housing and cap for improved clamp load
Enhanced clutch pack with 80% thicker steel disks to resist premature tooth wear
Nine speed ratios available, including low and high speed options
Wet Spline Lubrication option provides 7 to 10 times greater shaft life
Electronic Overspeed Control (EOC) and SmartStart option reduces shock load at start-up
Tech Specs
- Mounting Type: 10-Bolt
- Shift Type: Hydraulic (PowerShift) Hot Shift
- Transmission Compatibility: Allison automatic transmissions
- Continuous Torque: 390 lb-ft (529 Nm)
- Output Types: SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
- Output Shaft Options: 3/4 in. 11-tooth pump spline, SAE B 7/8 in. 13-tooth pump spline, SAE C 1-1/4 in. 14-tooth pump spline, SmartStart 1-1/4 in. round shaft with 5/16 in. key, 1410 companion flange
- Output Power: 37 HP at 500 RPM, 74 HP at 1000 RPM
- Speed Ratios: Nine ratios including low and high
- Continuous Operation: Yes
- Lubrication: Pressure lube or Wet Spline option
Additional Information
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
- MuncieA20-A1005-HR3X4PXNot listed online. Call 877-776-4600 or request a quote.
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

