Features
Chelsea 281 Series hydraulic hot-shift PTO for Allison 10-bolt automatic transmissions
Ductile iron bearing cap, 117% stronger than gray iron, with O-ring sealing for improved clamp load
Enhanced clutch pack with 80% thicker steel discs to resist premature tooth wear
Nine speed ratios, spanning low and high speeds
Rotatable cast-iron flanges reduce pump clearance interference; driveline positive stop prevents oil seal damage
Wet spline lubrication option provides 7 to 10 times greater shaft life; SmartStart and Electronic Overspeed Control (EOC) included
Tech Specs
- Mounting Type: 10-Bolt aperture (Allison and Caterpillar automatic transmissions)
- Shift Type: PowerShift (Hydraulic) - hot shift
- Continuous Torque: 390 lb-ft (529 Nm) series rating - see application pages for actual values
- Speed Ratios: Nine, including low and high
- Output Types: SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
- Lubrication: Pressure Lube or Wet Spline options
- Continuous Operation: Yes
- Part Number: 281GDFJP-D3RK or 281GDFJPD3RK
Additional Information

The Chelsea 281 Series is suited for demanding markets including fire and rescue, truck cranes, pumper cleaner units, and refuse applications. The series supports multiple output shaft types, including Smart Start round shaft (1-1/4" with 5/16" key), SAE B (7/8" - 13T) pump spline, SAE C (1-1/4" - 14T) pump spline, and 1410 companion flange, among others. Applicable Parker Chelsea service documents include the 281/288 Series Parts List (HY25-2281-M1/US) and the 267/281/288/871/878 Series Owner's Manual.
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

