The Chelsea 281GDKVW-B8RF or 281GDKVWB8RF is a 281 Series hydraulic hot-shift Power Take-Off designed for automatic transmissions with a 10-bolt aperture, including Allison and Caterpillar transmissions. This series features a ductile iron bearing cap rated 117% stronger than gray iron, an O-ring sealing configuration between the housing and bearing cap to improve clamp load, and an 80% thicker steel clutch pack to resist premature tooth wear. Nine speed ratios cover both low and high-speed needs. Rotatable cast-iron flanges reduce interference issues with pump mounting, and a Positive Stop on driveline outputs eliminates oil seal damage from coupling. The Wet Spline Lubrication option extends shaft life by 7 to 10 times. SmartStart reduces shock load at start-up, and Electronic Overspeed Control (EOC) protects driven equipment. Available from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Hydraulic PowerShift (hot-shift) operation for 10-bolt automatic transmission apertures, including Allison and Caterpillar
Ductile iron bearing cap, 117% stronger than gray iron, with O-ring sealing to improve clamp load and reduce vibrational effects
80% thicker steel discs in the clutch pack to resist premature tooth wear
Nine speed ratios including low and high speeds
Positive Stop for driveline outputs eliminates oil seal damage from coupling
Wet Spline Lubrication option provides 7 to 10 times greater shaft life
SmartStart reduces start-up shock load; Electronic Overspeed Control (EOC) protects driven equipment
Hose included, no need to order separately
Tech Specs
- Mounting Type: 10-Bolt aperture (Allison and Caterpillar automatic transmissions)
- Shift Type: Hydraulic PowerShift (hot-shift)
- Continuous Operation: Yes
- Series Continuous Torque Rating: 390 lb-ft (529 Nm) - see application pages for actual torque ratings
- Output Types: SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
- Output Shaft Options: SmartStart Round Shaft (1-1/4" - 5/16" Key), 3/4" - 11T Pump Spline, SAE B (7/8" - 13T) Pump Spline, SAE C (1-1/4" - 14T) Pump Spline, DIN 5462 Pump Spline, 1410 Companion Flange, DIN 120 Flange, DIN 100 Flange
- Shaft Power: 37 HP at 500 RPM, 74 HP at 1000 RPM
- Speed Ratios: Nine, including low and high speeds
- Lubricant Options: Pressure Lube, Wet Spline
- Markets: Fire and Rescue, Truck Cranes, Pumper Cleaner, Refuse
Additional Information
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
