Skip to main content

281GGFJP-D5RF Chelsea PTO Assembly

Chelsea

Listing Price: $6,825.24
Sale Price: $3,753.88

This item qualifies for FREE shipping on orders over $295 and under 70 lbs

(No reviews yet) Write a Review
Product Code:
CHL281GGFJPD5RF
Condition:
New
Availability:
Usually Ships in 3 to 5 Business Days
Adding to cart… The item has been added
The Chelsea 281 Series Power Take-Off, part number 281GGFJP-D5RF or 281GGFJPD5RF, is a hydraulically shifted hot-shift PTO engineered for automatic transmissions with a 10-bolt aperture, commonly matched to Allison transmissions. The 281 Series evolved from the top-selling 280 Series and introduces a ductile iron bearing cap rated 117% stronger than gray iron, an O-ring sealing configuration between the housing and bearing cap to improve clamp load, and clutch-pack steel disks that are 80% thicker to resist premature tooth wear. Nine speed ratios cover both low and high-speed demands. The wet spline lubrication option extends shaft life 7 to 10 times over a standard configuration. Call us to confirm proper fit for your transmission and application.

Features

Chelsea 281 Series hydraulic (PowerShift) hot-shift PTO for 10-bolt automatic transmission apertures, commonly Allison
Ductile iron bearing cap, 117% stronger than gray iron predecessor
O-ring sealing configuration between housing and bearing cap improves clamp load and reduces vibrational effects
Enhanced clutch pack with steel disks 80% thicker than prior design to resist premature tooth wear
Nine speed ratios available, including low and high speeds
Wet spline lubrication option provides 7 to 10 times greater shaft life
SmartStart reduces shock load at engagement; Electronic Overspeed Control (EOC) protects driven equipment

Tech Specs

  • Mounting Type: 10-Bolt aperture (Allison automatic transmissions)
  • Shift Type: PowerShift (Hydraulic hot-shift)
  • Continuous Operation: Yes
  • Series Continuous Torque: 390 lb-ft / 529 Nm (verify actual rating on application pages)
  • Series Intermittent Torque: 301-400 lb-ft / 501+ Nm (verify actual rating on application pages)
  • Output Types available in series: SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
  • Shaft Power (series): 37 HP at 500 RPM, 74 HP at 1000 RPM
  • Lubrication: Pressure Lube or Wet Spline option
  • Speed Ratios: Nine, including low and high

Additional Information

Chelsea PTO 281 Series model break down
Equivalent PTOs:

Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

Call Us Now!