The Chelsea 442 Series Power Take-Off, part number 442XSAPX-A5XK or 442XSAPXA5XK, is a 6-bolt mount PTO built for light-to-medium duty vocational applications including dump trucks, tow trucks, and service trucks. This unit is configured with an air shift actuator and an SAE B 2 or 4-bolt flange with a 7/8" 13-tooth SAE B shaft. Mounting uses a standard mount. The cast iron housing and tapered cone bearings on the output shaft provide the torque capacity and service life the 442 Series is known for. The low-profile shift cover keeps installation clearances manageable. No pressure lube is required for this assembly. Call us to confirm proper fit for your application.
Features
Chelsea 442 Series, 6-bolt transmission mount
Air shift actuation
SAE B 2 or 4-bolt flange with a 7/8" 13-tooth SAE B shaft
Cast iron housing with tapered cone bearings on the output shaft
No pressure lubrication required
Tech Specs
- Product Series: 442
- Mounting Type: 6-Bolt
- Mounting Option: Standard Mount (X)
- Gear Ratio Code: S (24/22)
- Input Gear Designator: AP
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift (A)
- Assembly Arrangement: 5
- Output Option: SAE B 2 or 4-Bolt Flange, SAE B Shaft (7/8" 13T) (XK)
Additional Information
The Chelsea 442 Series is suited for a range of vocational markets including aerial, construction, forestry, fire and rescue, and municipal equipment. Typical applications include snow and ice trucks, service trucks, dump trucks, and towing and recovery trucks. The 442 Series offers thirty-six output options and eleven internal speed ratios across the product line, making it adaptable to a wide range of transmission configurations. The intermittent torque rating for the 442 Series ranges from 201 to 300 lb-ft; consult Chelsea application pages to confirm the actual torque rating for this specific configuration. Output shaft power for the series is rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM.Equivalent PTOs:
- BezaresPT1000XON333RAView and buy
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

