The Chelsea 447 Series Power Take-Off Assembly, part number 447XQITX-W3XD or 447XQITXW3XD, uses a one-piece input gear with a space between two sets of gear teeth to eliminate interference problems inside the transmission PTO opening. It mounts via a 6-bolt pattern and shifts by wire/cable or mechanical means, with a 1-1/4" round output shaft (with key). Intermittent torque falls in the 201-300 lb-ft range; shaft power output runs 21 HP at 500 RPM and 43 HP at 1000 RPM. The 447 Series uses tapered bearings instead of needle bearings for greater load-bearing capability, and no adapter plate is required for most installations. Compatible with Eaton/Fuller, ZF, and other transmission manufacturers. Call us to confirm proper fit for your application.
Features
6-bolt mounting pattern, no adapter plate required for most installations
Wire/cable or mechanical shift type
1-1/4" round output shaft with key
One-piece input gear design eliminates interference inside the transmission PTO opening
Tapered bearings replace needle bearings for greater load-bearing capability
Compatible with Eaton/Fuller, ZF, and other transmission manufacturers
Tech Specs
- Intermittent Torque: 201-300 lb-ft (301-400 Nm); see application pages for actual torque ratings
- Shift Type: Wire/Cable or Mechanical
- Output Power: 36-45 HP (31-40 kW)
- Shaft Power: 21 HP (16 kW) at 500 RPM; 43 HP (32 kW) at 1000 RPM
- Mounting Type: 6-Bolt
- Output Shaft Type: 1-1/4" Round with key
- Transmission Compatibility: Eaton/Fuller, ZF, Other
