The Chelsea 447 Series Power Take-Off, part number 447XUESX-A3XD or 447XUESXA3XD, is a 6-bolt mount PTO assembly designed to eliminate interference problems inside the transmission PTO opening. It fits a range of transmissions from Eaton/Fuller, ZF, and other manufacturers without requiring an adapter plate. The wire/cable or mechanical shift operates a 1-1/4" round output shaft (with key). Intermittent torque ratings for the 447 Series run from 201 to 300 lb-ft, with shaft power of 21 HP at 500 RPM and 43 HP at 1000 RPM. The 447 Series uses tapered bearings rather than needle bearings for greater load-bearing capability. Call us to confirm proper fit for your specific transmission and application.
Features
6-bolt mounting, no adapter plate required
Wire/cable or mechanical shift type
1-1/4" round output shaft with key
Intermittent torque: 201-300 lb-ft (301-400 Nm); check application pages for actual ratings
Shaft power: 21 HP at 500 RPM, 43 HP at 1000 RPM
Designed to eliminate internal interference on a wide variety of transmissions including Eaton/Fuller and ZF
Tech Specs
- Mounting Type: 6-Bolt
- Shift Type: Wire/Cable, Mechanical
- Output Shaft Type: 1-1/4" Round, 1-1/4" Round with Key
- Transmission Manufacturer: Eaton/Fuller, ZF, Other
- Intermittent Torque: 201-300 lb-ft (301-400 Nm); 225 lb-ft / 305 Nm - check application pages for actual torque ratings
- Shaft Power: 21 HP at 500 RPM, 43 HP at 1000 RPM (16 kW at 500 RPM, 32 kW at 1000 RPM)
- Output Power: 36-45 HP (31-40 kW)
