The Chelsea 489 Series Power Take-Off, part number 489XFAHX-C3RB or 489XFAHXC3RB, mounts directly to 8-bolt manual transmission openings from Eaton Fuller, Mack, Tremec, and Volvo among others. Its one-piece cast iron housing eliminates the adapter plate found on many installations, cutting both mounting time and potential leak paths. Shift is wire/cable mechanical. The 1-1/4" round output shaft (with key) delivers up to 48 HP at 1,000 RPM and carries an intermittent torque rating of 250 lb-ft, matching the torque capacity of the Chelsea 442 Series. Strong tapered bearings replace needle bearings for greater load-bearing capability. Internal parts are common to the 442 Series, keeping your service inventory simple. Call us to confirm proper fit for your application.
Features
8-Bolt one-piece cast iron housing mounts directly to transmission opening, no adapter plate required
Wire/cable mechanical shift; electric-over-air shift option also available
1-1/4" round output shaft with key
Intermittent torque rating: 250 lb-ft (339 Nm), same capacity as Chelsea 442 Series
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Kit-style serviceability with internal parts common to the 442 Series; greaseable output options available
Tech Specs
- Product Series: 489
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable Mechanical
- Output Shaft Type: 1-1/4" Round with Key
- Intermittent Torque: 250 lb-ft (339 Nm), verify actual rating on Chelsea application pages
- Continuous Torque: De-rate intermittent rating by 30%, verify actual rating on Chelsea application pages
- Output Power: 46-55 HP (31-40 kW)
- Shaft Power: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1,000 RPM
- Transmission Compatibility: Eaton/Fuller, Volvo/Mack, Tremec, and other 8-bolt manual transmissions
- Lubricant: X = No Pressure Lube; P = Pressure Lube
- Configuration: 2-Gear Assembly
Additional Information
