The Chelsea 489XLAHX-A3XP or 489XLAHXA3XP is a 489 Series power take-off assembly built for manual transmissions with an 8-bolt PTO mounting aperture, including Eaton Fuller, Volvo/Mack, and Tremec units. The one-piece cast iron housing bolts directly to the 8-bolt opening without an adapter plate, reducing potential leak paths and cutting installation time. Shift is air shift. Intermittent torque for the 489 Series is 250 lb-ft (339 Nm); shaft power runs 24 HP at 500 RPM and 48 HP at 1,000 RPM. Tapered bearings replace needle bearings for greater load-bearing capability. Internal parts are common to the Chelsea 442 Series, keeping rebuild parts accessible. Call us to confirm proper fit for your transmission and application.
Features
8-bolt integral cast iron housing mounts directly to transmission opening without an adapter plate
Air shift; electric-over-air shift option also available in the 489 Series
Intermittent torque: 250 lb-ft (339 Nm); shaft power 24 HP at 500 RPM, 48 HP at 1,000 RPM
Internal parts common to the Chelsea 442 Series for straightforward servicing
Kit-style design simplifies field service and parts replacement
Tech Specs
- Product Series: 489
- Mounting Type: 8-Bolt (integral cast iron housing, no adapter plate required)
- Mounting Option: Standard Mount (X)
- Gear Ratio Code: L (25/34)
- Input Gear Designator: AH
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift (A)
- Assembly Arrangement: 3
- Output Option: XP
- Intermittent Torque: 250 lb-ft (339 Nm) - check application pages for actual torque ratings
- Continuous Torque: De-rate intermittent torque rating by 30% - check application pages for actual torque ratings
- Output Power: 46-55 HP (31-40 kW)
- Shaft Power: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1,000 RPM
- Transmission Compatibility: Eaton/Fuller, Volvo/Mack, Tremec, and other manual transmissions with 8-bolt aperture
Additional Information
