The Chelsea 489 Series Power Take-Off, part number 489XLDBX-A3XD or 489XLDBXA3XD, mounts directly to the 8-bolt transmission opening on most manual transmissions including Eaton Fuller, Mack, and Tremec -- no adapter plate needed. The one-piece cast iron housing fits the same torque capacity as the 442 Series, with a series intermittent torque rating of 201-300 lb-ft (301-400 Nm). Shift is wire/cable mechanical. The 1-1/4" round output shaft (with key) is driven by strong tapered bearings rather than needle bearings for greater load-bearing capability. Shaft power output is 24 HP at 500 RPM and 48 HP at 1,000 RPM. This is a genuine Chelsea part sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
8-bolt one-piece cast iron housing mounts directly to transmission opening -- no adapter plate required
Wire/cable mechanical shift; electric-over-air shift option available in the 489 Series
1-1/4" round output shaft with key, supported by tapered bearings for greater load capacity than needle-bearing designs
Intermittent torque rating: 201-300 lb-ft (301-400 Nm); shaft power 24 HP at 500 RPM, 48 HP at 1,000 RPM
Kit-style construction shares internal parts with the Chelsea 442 Series for easier servicing
Greaseable output options to reduce pump shaft spline fretting and corrosion
Tech Specs
- PRODUCT SERIES: 489
- MOUNTING TYPE: 8-Bolt
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT SHAFT TYPE: 1-1/4" Round with Key
- INTERMITTENT TORQUE: 201-300 lb-ft (301-400 Nm)
- OUTPUT POWER: 46-55 HP (31-40 kW)
- SHAFT POWER: 24 HP at 500 RPM; 48 HP at 1,000 RPM (18 kW at 500 RPM; 36 kW at 1,000 RPM)
- LUBRICANT: X = No Pressure Lube; P = Pressure Lube
- TRANSMISSION COMPATIBILITY: Eaton Fuller, Mack, Tremec, Volvo (8-bolt aperture manual transmissions)
Additional Information
