The Chelsea 489 Series Power Take-Off, part number 489XLEVX-A5XK or 489XLEVXA5XK, mounts directly to an 8-bolt transmission opening on most manual transmissions, including Eaton Fuller, Volvo/Mack, and other compatible units. The one-piece cast iron housing eliminates the adapter plate needed on earlier designs, reducing potential leak paths and cutting installation time. This unit shifts via wire/cable mechanical actuation and delivers up to 250 lb-ft intermittent torque with an output power range of 46-55 HP. The 1-1/4" round output shaft (with key) connects to a wide range of hydraulic pumps and accessories. Tapered output bearings replace needle bearings for greater load capacity. Internal parts are common to the Chelsea 442 Series, so repair stock carries over. Call us to confirm proper fit for your application.
Features
8-bolt one-piece cast iron housing mounts directly to transmission, no adapter plate required
Compatible with Eaton Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO aperture
Wire/cable mechanical shift; electric-over-air shift option also available
250 lb-ft intermittent torque; shaft power 24 HP at 500 RPM, 48 HP at 1000 RPM
1-1/4" round output shaft with key; greaseable output options reduce spline fretting and corrosion
Kit-style construction shares internal parts with Chelsea 442 Series for easier service and common repair inventory
Tech Specs
- INTERMITTENT TORQUE: 250 lb-ft (339 Nm) - Check Application Pages for Actual Torque Ratings
- CONTINUOUS TORQUE: De-rate intermittent rating by 30% - Check Application Pages for Actual Torque Ratings
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT POWER: 46-55 HP (31-40 kW)
- SHAFT POWER: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1000 RPM
- OUTPUT SHAFT TYPE: 1-1/4" Round with Key
- MOUNTING TYPE: 8-Bolt
- PRODUCT SERIES: 489
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Volvo/Mack, and other compatible manual transmissions
- LUBRICANT: X = No Pressure Lube; P = Pressure Lube
Additional Information
