The Chelsea 489 Series Power Take-Off, part number 489XQAHX-V3GH or 489XQAHXV3GH, mounts directly to an 8-bolt transmission opening on most manual transmissions including Eaton Fuller, Volvo, Mack, and others. This specific unit uses wire/cable mechanical shift and carries a 1-1/4" round output shaft. The one-piece cast iron housing bolts straight to the transmission face, eliminating the adapter plate and reducing potential leak paths. The 489 Series delivers intermittent torque in the 201-300 lb-ft range and shaft power of 24 HP at 500 RPM or 48 HP at 1000 RPM. Strong tapered bearings replace needle bearings for greater load capacity. Internal parts are shared with the 442 Series, simplifying service. Call us to confirm proper fit for your transmission and application.
Features
8-bolt one-piece cast iron housing mounts directly to transmission face, no adapter plate needed
Wire/cable mechanical shift with electric-over-air shift option available in the 489 Series
1-1/4" round output shaft (with key)
Intermittent torque rating: 201-300 lb-ft (301-400 Nm); check application pages for actual rating
Shaft power: 24 HP at 500 RPM, 48 HP at 1000 RPM
Kit-style design with internal parts common to the Chelsea 442 Series for easier servicing
Tech Specs
- PRODUCT SERIES: 489
- MOUNTING TYPE: 8-Bolt
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT SHAFT TYPE: 1-1/4" Round with Key
- OUTPUT POWER: 46-55 HP (31-40 kW)
- SHAFT POWER: 24 HP at 500 RPM, 48 HP at 1000 RPM (18 kW at 500 RPM, 36 kW at 1000 RPM)
- INTERMITTENT TORQUE: 201-300 lb-ft (301-400 Nm) - Check Application Pages for Actual Torque Ratings
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO aperture
- LUBRICANT: X = No Pressure Lube, P = Pressure Lube
Additional Information
