The Chelsea 489 Series Power Take-Off, part number 489XRAHX-A6RA or 489XRAHXA6RA, mounts directly to an 8-bolt transmission opening on most manual transmissions including Eaton Fuller, Volvo, Mack, and others. Wire/cable mechanical shift keeps installation straightforward, and the one-piece cast iron housing eliminates the adapter plate required on earlier designs, reducing potential leak paths. Output shaft is a 1-1/4" round with key. The 489 Series delivers intermittent torque in the 201-300 lb-ft range and shaft power of 24 HP at 500 RPM or 48 HP at 1,000 RPM. Internal parts are common with the 442 Series, which simplifies parts stocking. Call us to confirm proper fit for your transmission and application.
Features
8-bolt one-piece cast iron housing mounts directly to transmission opening, no adapter plate needed
Wire/cable mechanical shift type
1-1/4" round output shaft with key
Intermittent torque rating: 201-300 lb-ft (301-400 Nm) per series specification
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Internal parts common to Chelsea 442 Series for simplified service and parts inventory
Greaseable output options available to reduce shaft spline fretting and corrosion
Tech Specs
- Intermittent Torque: 201-300 lb-ft (301-400 Nm) - check application pages for actual torque ratings
- Shift Type: Wire/Cable Mechanical
- Output Power: 46-55 HP (31-40 kW)
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1,000 RPM (18 kW at 500 RPM, 36 kW at 1,000 RPM)
- Output Shaft Type: 1-1/4" Round with Key
- Mounting Type: 8-Bolt
- Compatible Transmissions: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO aperture
- Product Series: 489
- Lubricant: X = No Pressure Lube, P = Pressure Lube
Additional Information
