The Chelsea 489 Series Power Take-Off Assembly, part number 489XUEVX-A5XD or 489XUEVXA5XD, mounts directly to 8-bolt manual transmission openings from Eaton/Fuller, Volvo/Mack, and other compatible manufacturers. The one-piece cast iron housing eliminates the adapter plate, cutting potential leak paths and reducing installation time. Shift type is wire/cable mechanical. The 1-1/4" round output shaft supports up to 250 lb-ft intermittent torque, with shaft power rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM. Strong tapered bearings replace needle bearings for greater load capacity. Internal parts are common to the Chelsea 442 Series. Call us to confirm proper fit for your application.
Features
8-bolt one-piece cast iron housing mounts directly to compatible manual transmissions, no adapter plate required
Wire/cable mechanical shift type
1-1/4" round output shaft; greaseable output option to reduce spline fretting and corrosion
250 lb-ft intermittent torque capacity; shaft power 24 HP at 500 RPM, 48 HP at 1,000 RPM
Tapered bearings for greater load-bearing capability versus needle bearing designs
Kit-style design with internal parts common to the Chelsea 442 Series simplifies service
Tech Specs
- PRODUCT SERIES: 489
- MOUNTING TYPE: 8-Bolt
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT SHAFT TYPE: 1-1/4" Round
- INTERMITTENT TORQUE: 250 lb-ft (339 Nm) - Check Application Pages for Actual Torque Ratings
- CONTINUOUS TORQUE: De-rate intermittent rating by 30% - Check Application Pages for Actual Torque Ratings
- OUTPUT POWER: 46-55 HP (31-40 kW)
- SHAFT POWER: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1,000 RPM
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Volvo/Mack, and other 8-bolt manual transmissions
- LUBRICANT: X = No Pressure Lube; P = Pressure Lube
Additional Information
