Chelsea 489 Series Power Take-Off Assembly, part number 489XUEVX-A5XK or 489XUEVXA5XK, is an 8-bolt mount PTO built for manual transmissions including Eaton/Fuller, Volvo/Mack, and Tremec platforms. The one-piece cast iron housing bolts directly to the 8-bolt transmission opening, eliminating the need for an adapter plate and reducing potential leak paths. Shift is wire/cable mechanical. The output shaft is a 1-1/4" round configuration with key. Intermittent torque rating for the 489 Series is 201-300 lb-ft; check application pages for the actual rating specific to your application. Shaft power is 24 HP at 500 RPM and 48 HP at 1,000 RPM. Strong tapered bearings replace needle bearings for greater load-bearing capability. Call us to confirm proper fit for your transmission.
Features
8-bolt one-piece cast iron housing mounts directly to transmission opening, no adapter plate required
Wire/cable mechanical shift; electric-over-air shift option also available in the 489 Series
1-1/4" round output shaft with key
Tapered bearings for greater load capacity compared to needle-bearing designs
Kit-style construction simplifies service; internal parts common to the Chelsea 442 Series
Greaseable output options available to reduce pump shaft spline fretting and corrosion
Tech Specs
- PRODUCT SERIES: 489
- MOUNTING TYPE: 8-Bolt
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT SHAFT TYPE: 1-1/4" Round with Key
- INTERMITTENT TORQUE: 201-300 lb-ft (301-400 Nm) - Check Application Pages for Actual Torque Ratings
- CONTINUOUS TORQUE: De-rate intermittent rating by 30% - Check Application Pages for Actual Torque Ratings
- OUTPUT POWER: 46-55 HP (31-40 kW)
- SHAFT POWER: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1,000 RPM
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO opening
- LUBRICANT: X = No Pressure Lube; P = Pressure Lube
Additional Information
