The Chelsea 489 Series Power Take-Off, part number 489ZLCRX-W4XK or 489ZLCRXW4XK, mounts directly to 8-bolt transmission openings on Eaton/Fuller, Volvo/Mack, and other compatible manual transmissions. The one-piece cast iron housing eliminates the adapter plate found on earlier designs, reducing both installation time and potential leak paths. Shift is accomplished via wire/cable mechanical actuation. The 489 Series delivers up to 48 HP at 1,000 RPM, with an intermittent torque rating of 250 lb-ft for this series. Tapered bearings replace needle bearings for increased load capacity. Internal components are common with the Chelsea 442 Series, simplifying parts stocking. Call us to confirm proper fit for your specific transmission.
Features
8-Bolt direct-mount cast iron housing fits Eaton/Fuller, Volvo/Mack, and other manual transmissions
Wire/cable mechanical shift actuation
SAE B 2 or 4-bolt flange with a 7/8" 13-tooth SAE B shaft
Intermittent torque rating: 250 lb-ft (489 Series); shaft power 24 HP at 500 RPM, 48 HP at 1,000 RPM
Tapered bearings for greater load capacity versus needle-bearing designs
Internal parts common to Chelsea 442 Series; kit-style construction simplifies service
Tech Specs
- Product Series: 489
- Mounting Type: 8-Bolt (direct to transmission, no adapter plate)
- Mounting Option: Deep Mount (Z)
- Gear Ratio Code: L (25/34)
- Input Gear Designator: CR
- Lube Option: No Pressure Lube (X)
- Shift Option: Cable (Wire) Shift (W)
- Assembly Arrangement: 4
- Output Option: SAE B 2 or 4-Bolt Flange, SAE B Shaft (7/8" 13T) (XK)
- Output Power: 46-55 HP (31-40 kW)
- Shaft Power: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1,000 RPM
- INTERMITTENT TORQUE (Series): 250 lb-ft / 339 Nm (check application pages for actual torque ratings)
- Continuous Torque: De-rate intermittent rating by 30% (check application pages for actual ratings)
- Transmission Compatibility: Eaton/Fuller, Volvo/Mack, and other 8-bolt manual transmissions
Additional Information
