The Chelsea 489 Series Power Take-Off Assembly, part number 489ZLDAX-A5AF or 489ZLDAXA5AF, mounts directly to 8-bolt transmission openings on Eaton/Fuller, Volvo/Mack, and other compatible manual transmissions without an adapter plate, eliminating a common leak path. This unit uses a wire/cable mechanical shift and delivers a 1-1/4" round output shaft with key. Intermittent torque for the 489 Series is rated at 201-300 lb-ft (301-400 Nm), matching the torque capacity of Chelsea's 442 Series. Shaft power output is 24 HP at 500 RPM and 48 HP at 1,000 RPM. The one-piece cast iron housing uses tapered bearings in place of needle bearings for improved load bearing. Call us to confirm proper fit for your application.
Features
8-Bolt direct-mount cast iron housing eliminates the need for an adapter plate, reducing potential leak paths
Wire/cable mechanical shift type
1-1/4" round output shaft with key
Intermittent torque rating: 201-300 lb-ft (301-400 Nm); shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Tapered bearings replace needle bearings for greater load-bearing capability
Kit-style design with internal parts common to Chelsea 442 Series simplifies servicing
Tech Specs
- Product Series: 489
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable Mechanical
- Output Shaft Type: 1-1/4" Round with Key
- Intermittent Torque: 201-300 lb-ft (301-400 Nm) - Check Application Pages for Actual Torque Ratings
- Continuous Torque: De-rate intermittent rating by 30% - Check Application Pages for Actual Torque Ratings
- Output Power: 46-55 HP (31-40 kW)
- Shaft Power: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1,000 RPM
- Transmission Compatibility: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO aperture
- Lubricant: X = No Pressure Lube, P = Pressure Lube
Additional Information
