The Chelsea 489 Series Power Take-Off Assembly, part number 489ZRDAX-V5XK or 489ZRDAXV5XK, mounts directly to an 8-bolt transmission opening. The one-piece cast iron housing eliminates the adapter plate needed on many competing units, reducing both installation time and potential leak paths. Intermittent torque capacity is 250 lb-ft (339 Nm), matching the Chelsea 442 Series. Output is an SAE B 2 or 4-bolt flange with a 7/8" 13-tooth SAE B shaft, and shift is air shift. Output power runs 24 HP at 500 RPM and 48 HP at 1,000 RPM. Tapered bearings replace the needle bearings found in earlier designs for greater load-bearing capability. Call us to confirm proper fit for your application.
Features
8-Bolt direct-mount cast iron housing fits Eaton Fuller, Mack, and Tremec transmissions without an adapter plate
Air shift with electric-over-air shift option available in the 489 Series
250 lb-ft (339 Nm) intermittent torque capacity, equal to the Chelsea 442 Series
SAE B 2 or 4-bolt flange with a 7/8" 13-tooth SAE B shaft
Internal parts are common to the Chelsea 442 Series, simplifying service inventory
Kit-style design allows in-field service without specialized tooling
Tech Specs
- Product Series: 489
- Mounting Type: 8-Bolt
- Mounting Option: Deep Mount (Z)
- Gear Ratio Code: R (22/24)
- Input Gear Designator: DA
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift without Installation Kit (V)
- Assembly Arrangement: 5
- Output Option: SAE B 2 or 4-Bolt Flange, SAE B Shaft (7/8" 13T) (XK)
- Intermittent Torque: 250 lb-ft (339 Nm) - check application pages for actual torque ratings
- Continuous Torque: De-rate intermittent rating by 30% - check application pages for actual torque ratings
- Output Power: 46-55 HP (31-40 kW)
- Shaft Power: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1,000 RPM
- Transmission Compatibility: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO aperture
Additional Information
Equivalent PTOs:
- BezaresPT2010XJN243RAView and buy
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

