The Chelsea 541 Series Power Take-Off Assembly, part number 541-MATAXV or 541MATAXV, mounts on the rear countershaft of Eaton Fuller transmissions, including the Advantage and UltraShift series. This rear mount unit uses Chelsea's Thrushaft® design, requiring only three fasteners for installation with no backlash adjustment needed. The 1-1/2"-10T spline output shaft accepts a 1410 companion flange, making it well suited for driveline-to-product-pump configurations. Intermittent torque capacity reaches 400 lb-ft (check application pages for actual ratings), and output power exceeds 56 HP. Shift is lever/mechanical. Call us to confirm proper fit for your specific transmission.
Features
Mounts on the rear countershaft of Eaton Fuller transmissions, including Advantage and UltraShift series
Thrushaft® design installs with only three fasteners and requires no backlash adjustment
1-1/2"-10T spline output with 1410 series companion flange for direct driveline connection
Lever/mechanical shift type
Intermittent torque capacity up to 400 lb-ft (542 Nm) - check application pages for actual ratings
Rear mount configuration provides additional clearance at the back of the transmission for pump or driveline routing
Tech Specs
- Transmission Manufacturer: Eaton/Fuller
- Mounting Type: Rear Mount
- Shift Type: Lever, Mechanical
- Output Shaft Type: 1-1/2"-10T Spline with 1410 Series Companion Flange
- Intermittent Torque: Up to 400 lb-ft / 542 Nm (check application pages for actual torque ratings)
- Output Power: 56+ HP / 51+ kW
- Shaft Power: 38 HP at 500 RPM, 76 HP at 1000 RPM (28 kW at 500 RPM, 57 kW at 1000 RPM)
- Continuous Operation: Yes, with 30% de-rating
Additional Information
