The Chelsea 880XDITP-H3XS is an 880 Series Power Take-Off assembly built for heavy-duty, high-torque applications. It mounts via an 8-bolt aperture and shifts via lever mechanical control. The output shaft is a 1-1/2"-10 spline with a 1410 companion flange. Intermittent torque rating for the 880 Series reaches 500 lb-ft (678 Nm); continuous operation is possible with a 30% de-rating. Shaft power output is 48 HP at 500 RPM and 95 HP at 1,000 RPM. Compatible transmissions span Volvo/Mack, Allison, Eaton/Fuller, and others. Typical applications include fire trucks, bulk haulers, oil field equipment, aerial units, and large truck recovery. Call us to confirm proper fit for your specific transmission.
The Chelsea 880 Series is suited for demanding mobile and on-highway applications including bulk haulers, fire trucks, oil field equipment, aerial units, winch setups, and large truck recovery. The series supports a wide variety of transmission manufacturers and features constant mesh input gears for high and low speed operation. Tapered cone bearings provide load-bearing capability suited to sustained heavy-duty cycles. The dual-pump output design allows a hydraulic pump to be mounted on each end of the PTO, maximizing hydraulic system flexibility. The removable shift cover makes backlash adjustment straightforward during installation and service.
Features
8-bolt mounting fits most manual transmissions compatible with 880 Series aperture
Lever mechanical shift with optional air control shift configuration
1-1/2"-10T spline output shaft with 1410 series companion flange
Intermittent torque rating: 500 lb-ft (678 Nm); continuous service available at 30% de-rating
Shaft power: 48 HP at 500 RPM, 95 HP at 1,000 RPM
Cast iron housing with removable shift cover for simplified backlash adjustment
Tech Specs
- Mounting Type: 8-Bolt
- Shift Type: Lever Mechanical
- Output Shaft Type: 1-1/2" - 10T Spline with 1410 Series Companion Flange
- Intermittent Torque: 500 lb-ft / 678 Nm (Check Application Pages for Actual Torque Ratings)
- Output Power: 56+ HP / 51+ kW
- Shaft Power: 48 HP (500 RPM), 95 HP (1,000 RPM) / 36 kW (500 RPM), 71 kW (1,000 RPM)
- Continuous Operation: Yes, with 30% de-rating
- Compatible Transmissions: Volvo/Mack, Allison, Eaton/Fuller, Other
- Dual-Pump Output: Yes
Additional Information
The Chelsea 880 Series is suited for demanding mobile and on-highway applications including bulk haulers, fire trucks, oil field equipment, aerial units, winch setups, and large truck recovery. The series supports a wide variety of transmission manufacturers and features constant mesh input gears for high and low speed operation. Tapered cone bearings provide load-bearing capability suited to sustained heavy-duty cycles. The dual-pump output design allows a hydraulic pump to be mounted on each end of the PTO, maximizing hydraulic system flexibility. The removable shift cover makes backlash adjustment straightforward during installation and service.
