Dana Spicer part number 100DS55002G-880M or 100DS55002G880M is an SPL100 series drive shaft built with a steel tube measuring 4.000 inches in diameter x 0.0948-inch wall thickness (101.6 x 2.4 mm), with a tube length of 34.65 inches (880 mm). Collapsed center-line yoke to center-line yoke length is 49.05 inches (1245.8 mm), and center-line yoke to end of spline sleeve collapsed measures 51.21 inches (1300.8 mm). Maximum slip travel is 4.33 inches (110 mm); mid-slip and half-max-slip each measure 2.17 inches (55 mm). The shaft operates at a maximum joint angle of 17 degrees, is phased at 0 degrees, and uses Style 2 universal joints included with the shaft. The flange face end installs welded. Call us to confirm proper fit for your application.
Features
SPL100 series driveline classification
4.000-in. diameter steel tube, 0.0948-in. wall thickness (101.6 x 2.4 mm)
Tube length 34.65 in. (880 mm); collapsed CL-to-CL length 49.05 in. (1245.8 mm)
Maximum slip 4.33 in. (110 mm); phased at 0 degrees
Maximum joint angle 17 degrees
Style 2 universal joints included; flange face end installed welded
Tech Specs
- Series: SPL100
- Shaft Material: Steel
- Tube Size: 4.000 in. diameter x 0.0948 in. wall (101.6 x 2.4 mm)
- Tube Length: 34.65 in. (880 mm)
- CL Yoke to CL Yoke - Collapsed: 49.05 in. (1245.8 mm)
- CL Yoke to End of Spline Sleeve - Collapsed: 51.21 in. (1300.8 mm)
- Flange Face - Installed: Welded
- Max Slip: 4.33 in. (110 mm)
- Mid Slip: 2.17 in. (55 mm)
- 1/2 Max Slip: 2.17 in. (55 mm)
- Joint Angle: 17 degrees
- Phased: No (0 degrees)
- U-Joint Style: 2
- Universal Joints Included: Yes
- Slip Assembly: No
- High Performance: No
