The Dana Spicer 250DS85001-970M or 250DS85001970M is a welded steel drive shaft built to SPL250 and SPL250 Lite series specifications. The steel tube measures 4.67 x .205 inches (118.6 x 5.20 mm) with a tube length of 38.19 inches (970 mm). Collapsed center-line-to-center-line yoke length is 46.38 inches (1,178 mm), and center-line yoke to end of yoke shaft extends 60.08 inches (1,526 mm) when measured collapsed. Maximum slip travel is 4.33 inches (110 mm). The assembly ships with two universal joints installed, phased at 0 degrees, and supports a 25-degree joint angle. Call us to confirm proper fit for your application.
Features
SPL250 and SPL250 Lite series drive shaft
Welded steel assembly with 4.67 x .205 in. (118.6 x 5.20 mm) tube
Tube length 38.19 in. (970 mm); collapsed CL-to-CL yoke span 46.38 in. (1,178 mm)
Maximum slip travel 4.33 in. (110 mm)
2 universal joints included, phased 0 degrees
25-degree joint angle rating
Tech Specs
- Series SPL250, SPL250 Lite
- CL Yoke To CL Yoke (MM) - COLL 1178.0000
- Tube Length (MM) 970.0000
- CL Yoke To CL Yoke (IN) - COLL 46.3780
- CL Yoke To End Of Yoke Shaft (IN)-COLL 60.0787
- CL Yoke To End Of Yoke Shaft (MM)-COLL 1526.0000
- Joint Angle 25
- Max Slip (IN) 4.3307
- Max Slip (MM) 110.0000
- No. of Universal Joint Included 2
- Phased - Degrees 0
- Phased (Yes/No) No
- Shaft Material Steel
- Tube Length (IN) 38.1890
- Tube Size (IN) 4.67 x .205
- Tube Size (Mm) 118.6 x 5.20
- Universal Joints Included Yes
- Unwelded/Welded Assembly Welded
