The Dana Spicer 6-4-7301-1 or 6473011 is a 1710 series HR-style splined-hole end yoke for manual transmission output applications. It carries an involute spline with a 38-spline count, a major diameter of 1.998 in., and a hub diameter of 2.750 in. The outside yoke dimension measures 6.190 in., the bearing cap seat diameter is 1.938 in., and the center-line-to-end-hub length is 5.250 in. Length through the hole is 2.125 in. Maximum operating joint angle is 34.5 degrees. Forged steel construction. This yoke does not include a slinger or plug. Cross-references include 15656447, GM15656447, 86746, 17TYS32-66, and 17TYS3273. Call us to confirm proper fit for your application.
Features
Dana Spicer 1710 series HR-style end yoke
38-spline involute splined hole, major diameter 1.998 in.
Hub diameter 2.750 in.; center-line to end hub 5.250 in.
Outside yoke dimension 6.190 in.; bearing seat diameter 1.938 in.
Length through hole 2.125 in.; maximum joint angle 34.5 degrees
Forged steel; slinger and plug not included
Tech Specs
- Series 1710
- Yoke Style HR
- Type Splined Hole
- Spline Count 38
- Involute Spline Yes
- Major Diameter 1.998 in.
- Hub Diameter (R) 2.750 in.
- C/L To End Hub (S) 5.250 in.
- Outside Yoke Dimension (E) 6.190 in.
- Yoke Bearing Dimension (D) 1.938 in.
- Length Thru Hole (Q) 2.125 in.
- Joint Angle #1 34.5 degrees
- Includes Slinger/Plug No
- Material Steel
- VMRS 026001083
