The Eaton Detroit Locker differential install kit K-F7.5R or KF75R is purpose-built for the Ford 7.5 in. rear axle. The kit covers the full bearing and hardware set needed for a proper carrier installation: Timken carrier bearings, head bearing, tail bearing, carrier shims, pinion shims, pinion seal, pinion nut, crush sleeve, cover gasket, ring gear bolts, thread locking compound, and gear marking compound. The axle carries 28 pinion splines and 28 axle splines, with a 10-bolt ring gear in standard rotation. Axle bearings and axle seals are not included, nor is RTV gasket maker. This kit is noted for use with Eaton part numbers 162C57A and 912A316. Call us to confirm proper fit for your application.
Features
Ford 7.5 in. rear axle application
Timken carrier bearings, head bearing, and tail bearing included
28 pinion splines and 28 axle splines
10-bolt ring gear, standard rotation
Includes carrier shims, pinion shims, pinion seal, crush sleeve, pinion nut, and cover gasket
Thread locking compound and gear marking compound included
For Eaton units 162C57A and 912A316
Axle bearings, axle seals, and RTV gasket maker not included
Tech Specs
- Axle Description: Ford 7.5 in.
- Axle Location: Rear
- Pinion Spline Count: 28
- Axle Spline Count: 28
- Ring Gear Bolts: 10
- Cover Bolts: 10
- Ring Gear Rotation: Standard
- Bearing Brand: Timken
- Carrier Bearings Included: Yes
- Head Bearing Included: Yes
- Tail Bearing Included: Yes
- Carrier Shims Included: Yes
- Pinion Shims Included: Yes
- Pinion Seal Included: Yes
- Pinion Nut Included: Yes
- Crush Sleeve Included: Yes
- Ring Gear Bolts Included: Yes
- Cover Gasket Included: Yes
- Thread Locking Compound Included: Yes
- Gear Marking Compound Included: Yes
- Axle Bearings Included: No
- Axle Seals Included: No
- RTV Gasket Maker Included: No
- For Eaton Units: 162C57A, 912A316
