Fabco bearing spacer ring 756-0249-007 is the .432 in. thick ring listed at item 38 of the TC 270 upper shaft assembly for models with PTO. The book prints seven thicknesses under that item, from .396 to .432 in., and its footnote says to select one spacer ring to give .001 in. tight to .005 in. loose end play with the output yoke or sealing ring installed. This ring is the thick end of that range. It measures 3.00 in. by 2.52 in. by .432 in. and is printed with the output end bearing cone, cup and carrier on the same sheet. Genuine Fabco part from Pro Gear and Transmission.
Features
Bearing spacer ring, .432 in. thick
Overall size 3.00 in. by 2.52 in. by .432 in.
Item 38 in the Fabco TC 270 upper shaft assembly, models with PTO
Thickest of the seven rings printed for that item, which run from .396 to .432 in.
The book's footnote selects a ring for .001 in. tight to .005 in. loose end play with the output yoke or sealing ring installed
Genuine Fabco part from Pro Gear and Transmission
Tech Specs
- Part type: Bearing spacer ring
- Thickness: .432 in.
- Overall size: 3.00 in. x 2.52 in. x .432 in.
- Parts list reference: item 38, Fabco TC 270 upper shaft assembly, models with PTO
- End play printed with that item: .001 in. tight to .005 in. loose with the output yoke or sealing ring installed
- UPC: 193174403187
Used in this Fabco Transfer Case model
