The Muncie A30-A1007-MX5X4BX or A30A1007MX5X4BX is a 10-bolt constant drive power take-off built for Allison 3000 and 4000 Series transmissions. It mounts with extended-length fasteners across three available housing arrangements, giving fleet installers flexibility without sourcing additional hardware. The rotatable pump flange simplifies hydraulic connections at any orientation, and increased clearance around the unit eases installation in tight bays. Tapered roller bearings extend service life, while a larger-diameter output shaft adds durability at the working end. Gear geometry is optimized to minimize operating noise, and reduced leak paths keep the unit cleaner in service. The A30 Series carries a single intermittent/continuous torque rating and accepts the EX Drive shaft extension. Available from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
10-bolt mount, constant drive configuration for Allison 3000 and 4000 Series transmissions
Rotatable pump flange for flexible hydraulic connection orientation
Tapered roller bearings for extended PTO service life
Increased output shaft diameter for greater durability
Three housing arrangements available; extended-length mounting fasteners included
Compatible with EX Drive shaft extension
Tech Specs
Additional Information
| SPEED | 3000 SERIES | 4000 SERIES | INTERMITTENT CONTINUOUS HP (KW) | INTERMITTENT/CONTINOUS |
| RATIO | ENGINE % | ENGINE % | @ 1,000 RPM | TORQUE LBS.FT. (NM) |
| 5 | 74% | 105% | 77 (57) | 400 (542) |
| 6 | 85% | 122% | 77 (57) | 400 (542) |
| 7 | 99% | 141% | 79 (59) | 415 (563) |
| 8 | 114% | 163% | 69 (51) | 360 (488) |
| 9 | 122% | 175% | 65 (48) | 340 (461) |
| 10 | 131% | 187% | 59 (44) | 310 (420) |
| 11 | 151% | 215% | 52 (39) | 275 (373) |
| 12 | 162% | 231% | 50 (37) | 265 (359) |
| 15 | 201% | 287% | 39 (29) | 205 (278) |
