The Meritor 04-15199-001 or 0415199001 is a rear hub assembly engineered for L-series drive axles with a 19050 lb gross axle weight rating (GAWR). This is a hub-only unit, not fully dressed, built around Quadraulic brake geometry. The 10-stud wheel bolt circle measures 11.25 in. in diameter, with wheel stud holes at .785/.787 in. The disc bolt pattern is also 10-bolt on a 7.25 in. circle, using 9/16-12 UNC-2B fasteners. A 12-stud drive flange with a 5.25 in. bolt circle and 1/2-13 UNC-3B thread accepts drive flange stud 08-205741. Flange outer diameter is 13.406 in. Bearing journals reference inner cup 47620, inner cone 47686, outer cup 39520, and outer cone 39590, with oil seal A1205W1349. Call us to confirm proper fit for your application.
Features
L-series drive axle application, hub-only (not fully dressed), no tone ring
19050 lb GAWR
10-stud wheel bolt circle, 11.25 in. diameter, stud holes .785/.787 in.
10-bolt disc pattern on 7.25 in. circle, 9/16-12 UNC-2B fasteners
12-stud drive flange, 5.25 in. bolt circle, 1/2-13 UNC-3B thread, flange OD 13.406 in.
Bearing set: inner cup 47620, inner cone 47686, outer cup 39520, outer cone 39590; oil seal A1205W1349
Tech Specs
- Axle Series: L
- Axle Application: Drive
- Hub Type: Hub only
- Fully Dressed: No
- Tone Ring: No
- Brake Type: Quadraulic
- GAWR: 19,050 lb
- Wheel Stud Pattern: 10
- Wheel Stud Bolt Circle Diameter: 11.25 in.
- Wheel Stud Hole: .785/.787 in.
- Wheel Pilot Diameter: Stud
- Disc Bolt Pattern: 10
- Disc Bolt Circle Diameter: 7.25 in.
- Disc Bolt Size: 9/16-12 UNC-2B
- Drive Stud Pattern: 12
- Drive Stud Bolt Circle Diameter: 5.25 in.
- Drive Stud Thread: 1/2-13 UNC-3B
- Drive Flange Stud: 08-205741
- Flange Outer Diameter: 13.406 in.
- IBS to Mounting Face: 1.539 in.
- IBS to OBS: 4.638/4.598 in.
- IBS to Outer Surface: 7.327/7.287 in.
- Inner Cup: 47620
- Inner Cone: 47686
- Outer Cup: 39520
- Outer Cone: 39590
- Oil Seal: A1205W1349
- Base Part Number: 15199
- VMRS Code: 018-002-001
