Meritor part number 04-15828-001 or 0415828001 is a rear hub assembly for R-Series drive axles rated at 26,000 lb GAWR. Configured as a hub-only unit (not fully dressed) with a drum brake setup, it carries an integrated tone ring for ABS compatibility. Key dimensions include a wheel pilot diameter of 8.653/8.646 in., a drum pilot diameter of 8.778/8.775 in., and a flange outer diameter of 12.825 in. The 10-hole wheel stud and drum bolt patterns share an 11.25 in. bolt circle diameter. Drive studs use a 3/4-10 UNC-3B thread on a 7.00 in. bolt circle with an 8-stud pattern. Bearing components are inner cup 592A, inner cone 594A, outer cup 572, and outer cone 580, with oil seal A1205Q2487. Call us to confirm proper fit for your application.
Interchanges:
- 0415828001RI
- 415828001
- 82350415828001
- TDA0415828001
Features
R-Series drive axle application, hub-only configuration (not fully dressed)
GAWR: 26,000 lb
Tone ring included for ABS compatibility
10-hole wheel stud and drum bolt patterns, 11.25 in. bolt circle diameter
Wheel pilot diameter: 8.653/8.646 in.; drum pilot diameter: 8.778/8.775 in.
Drive stud thread: 3/4-10 UNC-3B on a 7.00 in. bolt circle (8-stud pattern)
Bearing set: inner cup 592A, inner cone 594A, outer cup 572, outer cone 580; oil seal A1205Q2487
Tech Specs
- Axle Series: R
- Axle Application: Drive
- Hub Type: Hub only
- Fully Dressed: No
- Brake Type: Drum
- Tone Ring: Yes
- GAWR: 26,000 lb
- Wheel Stud Pattern: 10-hole
- Wheel Stud Bolt Circle Diameter: 11.25 in.
- Wheel Stud Hole: 0.904/0.906 in.
- Wheel Pilot Diameter: 8.653/8.646 in.
- Drum Bolt Pattern: 10-hole
- Drum Bolt Circle Diameter: 11.25 in.
- Drum Bolt Size: 0.904/0.906 in.
- Drum Pilot Diameter: 8.778/8.775 in.
- ABS Pilot Diameter: 6.882/6.879 in.
- Flange Outer Diameter: 12.825 in.
- IBS to Mounting Face: 1.19 in.
- IBS to OBS: 4.327/4.287 in.
- IBS to Outer Surface: 6.917/6.877 in.
- Drive Stud Pattern: 8-stud
- Drive Stud Bolt Circle Diameter: 7.00 in.
- Drive Stud Thread: 3/4-10 UNC-3B
- Drive Flange Stud P/N: 08-007471
- Inner Cup: 592A
- Inner Cone: 594A
- Outer Cup: 572
- Outer Cone: 580
- Oil Seal: A1205Q2487
- Wheel Stud P/N: 09-001989
- Base Part Number: 15828
- VMRS Code: 018-002-001
