Meritor part 05-16008-098P72 or 0516008098P72 is a conventional, hub-only steer axle wheel hub for the FH axle series, rated at 16,500 lb GAWR. This is an unfinished rough hub, it has not received final machining, and it ships without bearings, seals, or studs pre-installed. The hub carries a tone ring for ABS compatibility, with an ABS pilot diameter of 6.547/6.544 in. and a wheel pilot diameter of 8.653/8.646 in. The 10-stud wheel pattern sits on an 11.25 in. bolt circle, and the disc bolt circle measures 10.50 in. on a 10-bolt pattern. Hub cap mounting uses a 6-bolt, 6.00 in. circle with 3/8-16 UNC-3B threads. Call us to confirm proper fit for your application before ordering.
Features
FH series steer axle application, 16,500 lb GAWR
Conventional hub-only style, rough (unfinished), no final machining applied
Includes ABS tone ring; ABS pilot diameter 6.547/6.544 in.
Wheel pilot diameter 8.653/8.646 in.; rotor pilot diameter 8.497/8.493 in.
10-stud wheel pattern on 11.25 in. bolt circle; disc bolt circle 10.50 in.
Hub cap bolt circle 6.00 in., 6-bolt pattern, 3/8-16 UNC-3B thread
Tech Specs
- Axle Application: Steer
- Axle Series: FH
- Hub Style: Conventional
- Hub Type: Hub only
- Fully Dressed: No
- Notes: Rough hub, not finished
- GAWR: 16,500 lb
- Tone Ring: Yes
- ABS Pilot Diameter: 6.547/6.544 in.
- Wheel Pilot Diameter: 8.653/8.646 in.
- Rotor Pilot Diameter: 8.497/8.493 in.
- Flange Outer Diameter: 13.38 in.
- Wheel Stud Pattern: 10
- Wheel Stud Bolt Circle Diameter: 11.25 in.
- Wheel Stud Hole: 0.904/0.906 in.
- Disc Bolt Pattern: 10
- Disc Bolt Circle Diameter: 10.50 in.
- Disc Bolt Size: 0.646/0.666 in.
- Brake Type: EX
- IBS to Outer Surface: 4.144 in.
- IBS to OBS: 2.345/2.325 in.
- Inner Bearing Surface (IBS) to Mounting Face: 4.62 in.
- Hub Cap Bolt Circle Diameter: 6.00 in.
- Hub Cap Pattern: 06
- Hub Cap Bolt Thread: 3/8-16 UNC-3B
- Inner Cone: 6461A
- Inner Cup: 6420
- Outer Cone: 555S
- Outer Cup: 552A
- Oil Seal: A1205P1108; A1205Z780
- Base Part Number: 16008
- VMRS Code: 018-001-003
