828S-KIT05-L1DX Muncie PTO

The Muncie 828S-KIT05-L1DX or 828SKIT05L1DX is an 82 Series Power Take-Off built for high-torque truck applications. This unit uses a double-acting air shift for positive engagement and disengagement, and carries a cast iron housing. At speed ratio 05, the PTO delivers up to 95 HP and 500 lb.ft. intermittent torque (678 Nm) at 1,000 RPM, with a continuous torque rating of 350 lb.ft. (475 Nm). Seven direct-mount pump options are available, including S.A.E. "B," "BB," "C," and "D" flanges plus DIN 5462 mounts. Two companion flange output types support remote pump and mechanical drive configurations. Rotatable direct-mount flanges allow pump positioning for maximum clearance. Call us to confirm proper fit for your application.

Features

Double-acting air shift for positive engagement and disengagement
Cast iron housing construction
Speed ratio 05: 95 HP / 500 lb.ft. intermittent torque (678 Nm) at 1,000 RPM; 350 lb.ft. (475 Nm) continuous
Seven direct-mount pump options: S.A.E. "B," "BB," "C," "D" and DIN 5462 flanges
Two companion flange output types for remote pump or mechanical drive use
Rotatable direct-mount flanges for maximum pump clearance

Tech Specs

• 
• 
• 
• Housing: Cast iron
• Shift type: Double-acting air shift
• Speed ratios available (series): 8
• Output shaft options (series): 9
• Assembly arrangements: 2
• Direct-mount pump options: 7 (S.A.E. B, BB, C, D; DIN 5462)
• Dimensions (H x W x L): 11.5 in. x 14.63 in. x 21.13 in.

Additional Information

PTO TORQUE & HORSEPOWER RATINGS
Speed Ratio	Intermittent HP@1000 RPM	Intermittent Torque lbs.ft.	Continuous Torque lbs.ft.	Intermittent (kw)@1000 RPM	Intermittent Torque (NM)	Continuous Torque (NM)
05	95	500	350	(71)	(678)	(475)
06	85	450	315	(71)	(610)	(427)
08	85	450	315	(63)	(610)	(427)
09	78	410	287	(58)	(556)	(389)
10	78	410	287	(58)	(556)	(389)
12	71	375	263	(53)	(508)	(356)
13	71	375	263	(53)	(508)	(356)
15	67	350	245	(50)	(475)	(332)
19	57	300	210	(43)	(407)	(285)