The Muncie SH6F-F8412-A3BX or SH6FF8412A3BX is an SH Series air-shift power take-off built for high-torque hydraulic applications. It features a 6-bolt cast iron housing that mounts cleanly to most popular transmissions, with an integral air shift design that eliminates exposed air cylinders for a cleaner, more protected installation. The SH Series bridges the gap between lighter and heavier PTO families, offering 5 speed ratios and 12 output shaft options to match a wide range of pump types. Intermittent torque ratings run from 325 ft-lb to 400 ft-lb at 1,000 RPM depending on speed ratio selected, with continuous torque ratings from 228 ft-lb to 280 ft-lb. Call us to confirm proper fit for your transmission and pump configuration.
Features
Integral air shift design with no exposed air cylinder
6-bolt cast iron housing for strength and straightforward mounting
5 available speed ratios for application versatility
12 output shaft options to fit most popular pump types
Compatible input gear sets cover most popular transmission applications
Intermittent torque up to 400 ft-lb (542 Nm) at 1,000 RPM depending on ratio selected
Tech Specs
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
