The Muncie SH6S-M6512-A1CX (also referenced as SH6SM6512A1CX) is an SH Series air-shift power take-off built for high-torque applications. Air shift is fully integral with no exposed air cylinder. The 6-bolt cast iron housing simplifies mounting while delivering solid structural strength. With 5 available speed ratios and 12 output shaft options, the SH Series fits most popular transmissions and pump types. Intermittent torque ratings reach 400 lb-ft at the 05 and 07 speed ratios; the 09 ratio is rated at 375 lb-ft intermittent and 263 lb-ft continuous. The SH Series was designed to fill the gap between Muncie's TG and 82 Series PTOs. Call us to confirm proper fit for your transmission and pump configuration. 
Features
Integral air shift design with no exposed air cylinder
6-bolt cast iron housing for secure, straightforward mounting
5 speed ratios covering a broad range of application requirements
12 output shaft options to match most popular hydraulic pump types
Compatible input gear sets to fit most popular heavy-duty transmissions
Positioned between Muncie TG and 82 Series for mid-range high-torque demands
Tech Specs
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
