The Muncie SH6S-U6005-A1BX (also referenced as SH6SU6005A1BX) is an SH Series air-shift-only power take-off designed for high-torque applications. The SH Series fills the gap between the TG and 82 Series and uses an integral air shift design with no exposed air cylinder. The 6-bolt cast iron housing mounts directly to the transmission. With 17 input gear sets covering most popular transmissions, 5 available speed ratios, and 12 output shaft options suited to most pump types, this PTO adapts to a wide range of vocational truck installations. Torque ratings vary by speed ratio; see the ratings table in the extended information tab for specific intermittent and continuous values. Call us to confirm proper fit for your application.
Features
Integral air shift design with no exposed air cylinder
6-bolt cast iron housing for straightforward mounting and structural strength
17 input gear sets to fit most popular transmissions
5 available speed ratios for application versatility
12 output shaft options compatible with most popular pump types
Built for high-torque intermittent and continuous duty cycles
Tech Specs
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
