The Muncie SH8B-U6005-E3ZX or SH8BU6005E3ZX is an 8-bolt cast iron housing power take-off from the Muncie SH8 Series, built specifically for high-torque air-shift applications. The integral air shift design keeps the air cylinder fully enclosed inside the housing, simplifying installation and protecting the shift mechanism from road debris. Seventeen input gear sets cover most popular transmission configurations, and 12 output shaft options accommodate the most common hydraulic pump interfaces. Five available speed ratios let you match output speed to your pump requirements. The 8-bolt cast iron housing mounts solidly and resists flex under load. Call us to confirm proper fit for your transmission and pump combination.
Features
Integral air shift design with no exposed air cylinder for a clean, protected installation
8-bolt cast iron housing for solid mounting and high structural strength
17 input gear sets to fit most popular transmission models
12 output shaft options to match most common hydraulic pump types
5 available speed ratios to tune output speed to your application
SH8 Series built to fill demanding torque applications between lighter and heavier PTO families
Tech Specs
- Housing bolt pattern: 8-bolt
- Housing material: Cast iron
- Shift type: Air shift (integral, no exposed air cylinder)
- Input gear sets: 17
- Output shaft options: 12
- Speed ratios available: 5
- Series: Muncie SH8 Series
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
