The Muncie TG6N-S7113-A2SH or TG6NS7113A2SH is a TG6 Series double-gear power take-off with a 6-bolt housing and mechanical shift. The die-cast aluminum housing reduces noise and dissipates heat, while the constant mesh input gear isolates the transmission from engagement errors. At 9.13 in. tall, 10.38 in. wide, and 12.5 in. long, this unit mounts in a compact footprint that minimizes interference with surrounding components. Rotatable hydraulic flanges and an extra-large shift cover opening simplify pump alignment and backlash checks during installation or service. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
TG6 Series double-gear power take-off, 6-bolt housing
Mechanical shift configuration
Die-cast aluminum housing for reduced noise and heat dissipation
Constant mesh input gear isolates transmission from engagement errors
Rotatable hydraulic flanges maximize pump clearance
Extra-large shift cover opening allows easy backlash inspection
Tech Specs
- Series: TG6
- Housing: 6-bolt, die-cast aluminum
- Shift Type: Mechanical
- Height: 9.13 in.
- Width: 10.38 in.
- Length: 12.5 in.
- Part Number: TG6N-S7113-A2SH or TG6NS7113A2SH
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP @ 1000 RPM
|
Intermittent Torque (lb-ft)
|
Continuous Torque (lb-ft)
|
Intermittent (kW) @ 1000 RPM
|
Intermittent Torque (Nm)
|
Continuous Torque (Nm)
|
| 04 | 54 | 285 | 200 | (40) | (386) | (270) |
| 05 | 51 | 270 | 189 | (38) | (366) | (256) |
| 06 | 47 | 245 | 172 | (35) | (332) | (232) |
| 07 | 44 | 230 | 161 | (33) | (312) | (218) |
| 08 | 44 | 230 | 161 | (33) | (312) | (218) |
| 09 | 39 | 205 | 144 | (29) | (278) | (195) |
| 12H | 40 | 210 | 147 | (30) | (284) | (199) |
| 13H | 40 | 210 | 147 | (30) | (284) | (199) |
| 15H | 37 | 195 | 137 | (28) | (264) | (185) |
| 18H | 33 | 175 | 123 | (25) | (237) | (166) |
Ratings shown are for the TG Series family and vary by speed ratio. Confirm the correct ratio for this specific configuration before specifying torque or horsepower requirements.
