The 02475HD NTN Bower Tapered Roller Bearing Cone is built to the 02400 catalog series, with a 31.75 mm bore and a 22.225 mm cone width. It carries a dynamic load rating of 57 kN and a static load rating of 67 kN and is held to ABMA Class 4 (Inch) tolerance. As the inner ring of a tapered roller bearing, the cone carries the rollers on a tapered race so the bearing can take radial and axial loads together. Damage to the race surface of either half means the whole bearing should be replaced, because a new part run against an old mate sets up edge stress and early failure. Sold by Pro Gear and Transmission.
Features
Bore (ID): 31.75 mm
Cone width: 22.225 mm
Dynamic load rating: 57 kN
Static load rating: 67 kN
Catalog series 02400
ABMA Class 4 (Inch) tolerance
Tech Specs
- Bore (ID): 31.75 mm
- Cone width: 22.225 mm
- Dynamic load rating: 57 kN
- Static load rating: 67 kN
- Catalog series: 02400
- Tolerance class: ABMA Class 4 (Inch)
