The Chelsea 442 Series Power Take-Off, part number 442XSAHX-A3GF or 442XSAHXA3GF, is a 6-bolt mount PTO built for light-to-medium duty vocational applications including dump trucks, tow trucks, service trucks, and aerial units. The cast iron housing and tapered cone bearings on the output shaft are characteristic of the 442 Series, which carries an intermittent torque rating of 201-300 lb-ft and an output power range of 46-55 HP. The output uses a greaseable SAE B 2 or 4-bolt flange with a 1-inch 15-tooth SAE BB shaft. Shift is air shift. The output flange is 360-degree rotatable for improved clearance in tight installations. Call us to confirm proper fit for your specific transmission and application.
Features
6-bolt mounting for compatibility with a wide range of transmission applications
Cast iron housing with tapered cone bearings on the output shaft
Intermittent torque rating: 201-300 lb-ft (339 Nm) per 442 Series ratings
Output power: 46-55 HP; shaft power 24 HP at 500 RPM, 48 HP at 1,000 RPM
Greaseable SAE B 2 or 4-bolt flange with a 1-inch 15-tooth SAE BB shaft
Tech Specs
- Mounting Type: 6-Bolt
- Mounting Option: Standard Mount (X)
- Gear Ratio Code: S (24/22)
- Input Gear Designator: AH
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift (A)
- Assembly Arrangement: 3
- Output Option: Greaseable SAE B 2 or 4-Bolt Flange, SAE BB Shaft (1" 15T) (GF)
- Intermittent Torque (Series): 201-300 lb-ft (339 Nm) - verify actual rating on application page
- Output Power (Series): 46-55 HP (31-40 kW)
- Shaft Power: 24 HP at 500 RPM; 48 HP at 1,000 RPM
- Housing Material: Cast Iron
- Product Series: Chelsea 442
Additional Information
Parts manual and diagrams: Chelsea 442 Series PTO parts list with prices
Equivalent PTOs:
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

