The Chelsea 442 Series Power Take-Off, part number 442XSJWX-S3XD or 442XSJWXS3XD, is a 6-bolt mount PTO built around a cast iron housing with tapered cone bearings on the output shaft. The 442 Series carries an intermittent torque rating in the 201-300 lb-ft range and delivers up to 48 HP at 1,000 RPM via a round shaft with 1-1/4" key. Shift options for the series include wire/cable and mechanical configurations. Rotatable output flanges improve installation clearance in tight chassis layouts. Common vocational applications for the 442 Series include dump trucks, tow and recovery trucks, service trucks, and aerial equipment. A genuine Chelsea part, sold by Pro Gear and Transmission. Call us to confirm proper fit for your specific transmission and application.
Features
Chelsea 442 Series, 6-bolt transmission mount
Cast iron housing with tapered cone bearings on the output shaft
Round output shaft with 1-1/4" key
Intermittent torque rating: 201-300 lb-ft (339 Nm)
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Wire/cable or mechanical shift configurations available across the 442 Series
Tech Specs
- Mounting Type: 6-Bolt
- Output Shaft Type: Round Shaft, 1-1/4" Key
- Shift Type: Wire/Cable or Mechanical
- Intermittent Torque: 201-300 lb-ft (301-400 Nm); series nominal 250 lb-ft (339 Nm) - check application pages for actual torque rating
- Shaft Power: 24 HP (500 RPM) / 48 HP (1,000 RPM)
- Output Power: 46-55 HP
- Lubricant: No Pressure Lube (X designation)
- Dimensions (H x W x L): 8 in. x 10 in. x 14 in.
- NMFC Code: 128520 - Hydraulic PTOs, Pumps, Motors, etc.
