The Chelsea 442 Series Power Take-Off 442ZXAHX-A3GF or 442ZXAHXA3GF is a 6-bolt mount PTO built for light-to-medium duty vocational truck applications. The cast iron housing and tapered cone bearings on the output shaft give the 442 Series its class-leading torque capacity and extended service life. This unit uses a wire/cable mechanical shift and delivers a 1-inch round output shaft with a 1/4-inch key. The 442 Series supports up to 48 HP at 1,000 RPM and intermittent torque in the 201-300 lb-ft range, making it a practical choice for dump trucks, tow trucks, service trucks, and aerial equipment. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Chelsea 442 Series PTO, part number 442ZXAHX-A3GF or 442ZXAHXA3GF
6-bolt mounting for compatibility with a wide range of transmission applications
Wire/cable mechanical shift operation
1-inch round output shaft with 1/4-inch key
Cast iron housing with tapered cone bearings on the output shaft
Rated up to 48 HP at 1,000 RPM; intermittent torque 201-300 lb-ft (check application pages for actual torque ratings)
Tech Specs
- Mounting Type: 6-Bolt
- Shift Type: Wire/Cable, Mechanical
- Output Shaft Type: Round Shaft, 1 in. diameter with 1/4 in. key
- Intermittent Torque: 201-300 lb-ft (339 Nm) - check application pages for actual torque ratings
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
- Output Power: 46-55 HP
- Housing Material: Cast Iron
- Bearing Type: Tapered Cone Bearings
- Product Series: 442
- NMFC Code: 128520 (Hydraulic PTOs, Pumps, Motors, etc.)
