The Chelsea 489 Series Power Take-Off, part number 489XCAHP-A3XQ or 489XCAHPA3XQ, is a wire/cable mechanical-shift PTO built for 8-bolt manual transmission openings. The one-piece cast iron housing bolts directly to transmissions such as Eaton Fuller, Eaton Endurant, Mack, and Tremec without requiring an adapter plate, which reduces potential leak paths. The 489 Series carries an intermittent torque rating of 201-300 lb-ft (301-400 Nm) and delivers shaft power of 24 HP at 500 RPM or 48 HP at 1,000 RPM. Output is via a 1-1/4-inch round keyed shaft. Tapered bearings replace needle bearings for improved load capacity. Call us to confirm proper fit for your application.
Features
8-bolt one-piece cast iron housing mounts directly to compatible manual transmissions - no adapter plate required
Wire/cable mechanical shift operation
Intermittent torque rating: 201-300 lb-ft (301-400 Nm)
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
1-1/4-inch round keyed output shaft
Tapered bearings for greater load-bearing capacity over needle-bearing designs
Tech Specs
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable, Mechanical
- Intermittent Torque: 201-300 lb-ft (301-400 Nm)
- Shaft Power: 24 HP at 500 RPM / 48 HP at 1,000 RPM (18 kW at 500 RPM / 36 kW at 1,000 RPM)
- Output Power: 46-55 HP (31-40 kW)
- Output Shaft Type: Round Shaft, 1-1/4-inch Keyed
- Product Series: Chelsea 489
- Compatible Transmissions: Eaton Fuller, Eaton Endurant, Mack, Tremec (8-bolt aperture)
