The Chelsea 489 Series Power Take-Off, part number 489XFITX-V3XR or 489XFITXV3XR, is an 8-bolt mechanical-shift PTO designed for most manual transmissions including Eaton Fuller, Eaton Endurant, Mack, and Tremec. The one-piece cast iron housing bolts directly to the 8-bolt transmission opening, eliminating the adapter plate and its associated leak path. Intermittent torque capacity for the 489 Series runs 201 to 300 lb-ft. The shift mechanism on this unit is wire/cable mechanical. Output is via a 1-1/4-inch round keyed shaft. Tapered bearings replace needle bearings for improved load-bearing capability. Call us to confirm proper fit for your transmission and application.
Features
8-bolt one-piece cast iron housing mounts directly to transmission opening with no adapter plate required
Wire/cable mechanical shift operation
Intermittent torque rating: 201 to 300 lb-ft (301 to 400 Nm) for the 489 Series
Output shaft: 1-1/4 inch round shaft with key
Tagered bearings for greater load-bearing capability versus needle-bearing designs
Compatible with Eaton Fuller, Eaton Endurant, Mack, Tremec, and other manual transmissions with 8-bolt PTO aperture
Tech Specs
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable, Mechanical
- Intermittent Torque (Series): 201 to 300 lb-ft / 301 to 400 Nm
- Output Shaft Type: 1-1/4 in. Round Shaft with Key
- Output Power (Series): 46 to 55 HP / 31 to 40 kW
- Shaft Power: 24 HP at 500 RPM / 48 HP at 1000 RPM
- Compatible Transmissions: Eaton Fuller, Eaton Endurant, Mack, Tremec, and other 8-bolt manual transmissions
- Product Series: 489
