The Chelsea 489XQITX-V5RB or 489XQITXV5RB is a Power Take-Off unit from the Chelsea 489 Series, designed for manual transmissions with an 8-bolt PTO mounting aperture. The series covers transmissions including Eaton Fuller, Eaton Endurant, Mack, and Tremec. The one-piece cast iron housing bolts directly to the 8-bolt opening without an adapter plate, reducing potential leak paths and cutting installation time. Shift type for this series is wire/cable mechanical. Intermittent torque rating for the 489 Series runs 201 to 300 lb-ft (301 to 400 Nm), with output power of 46 to 55 HP (34 to 41 kW). Tapered bearings provide greater load-bearing capability than needle-bearing designs. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Chelsea 489 Series PTO, part number 489XQITX-V5RB or 489XQITXV5RB
8-bolt direct-mount cast iron housing, no adapter plate required
Wire/cable mechanical shift type
Intermittent torque: 201-300 lb-ft (301-400 Nm); output power: 46-55 HP
Tapered bearings replace needle bearings for greater load capacity
Compatible with Eaton Fuller, Eaton Endurant, Mack, Tremec, and other 8-bolt manual transmissions
Tech Specs
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable, Mechanical
- Intermittent Torque: 201-300 lb-ft (301-400 Nm)
- Output Power: 46-55 HP (34-41 kW)
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1000 RPM
- Output Shaft Type: Round shaft, 1-1/4 in. key
- Housing Material: One-piece cast iron
- Compatible Transmissions: Eaton Fuller, Eaton Endurant, Mack, Tremec (8-bolt aperture)
