The Chelsea 221 Series Power Take-Off Assembly, part number 221XCDAX-W3XD or 221XCDAXW3XD, is a 6-bolt mounted PTO designed for low-speed, heavy-duty applications including dump trucks, tow and recovery, and aerial equipment. It uses a wire/cable mechanical shift and delivers an intermittent torque rating of up to 250 lb-ft (339 Nm) - verify actual torque against Chelsea application pages for your configuration. The 1-1/4" round output shaft with keyway is compatible with Allison, Eaton/Fuller, Volvo/Mack, Hino, and other transmission families. Shaft power is rated at 24 HP at 500 RPM and 48 HP at 1000 RPM. The cast iron housing is available in standard or low-profile configurations. A genuine Chelsea part sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
6-bolt mounting for compatibility with Allison, Eaton/Fuller, Volvo/Mack, Hino, and other transmissions
Wire/cable mechanical shift type
1-1/4" round output shaft with keyway
Intermittent torque up to 250 lb-ft (339 Nm) - check Chelsea application pages for actual rating
Shaft power: 24 HP at 500 RPM, 48 HP at 1000 RPM
Available in standard or low-profile housing; greaseable pump shafts reduce spline fretting and corrosion
Tech Specs
- Intermittent Torque: 250 lb-ft / 339 Nm (check Chelsea application pages for actual torque rating for your application)
- Shift Type: Wire/Cable, Mechanical
- Output Power: 46-55 HP / 31-40 kW
- Output Shaft Type: 1-1/4" Round with key
- Transmission Compatibility: Allison, Eaton/Fuller, Volvo/Mack, Hino, and other manufacturers
- Mounting Type: 6-Bolt
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1000 RPM (18 kW at 500 RPM, 36 kW at 1000 RPM)
- Housing Options: Standard or low-profile
Additional Information
Equivalent PTOs:
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

