The Chelsea 221 Series Power Take-Off Assembly, part number 221ZLDAX-A3RB or 221ZLDAXA3RB, is a 6-bolt mounted PTO built for low-speed, heavy-duty vocational applications including dump trucks, tow and recovery, and aerial equipment. It uses a wire/cable mechanical shift and delivers up to 250 lb-ft (339 Nm) intermittent torque, with shaft power rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM. The 1-1/4" round output shaft with keyway suits a wide range of hydraulic pump drives. Compatible transmissions include Allison, Eaton/Fuller, Volvo/Mack, and Hino. A cast iron housing with tapered cone output bearings provides greater load-bearing capability than needle-bearing designs. Available in standard or low-profile housing configurations. Call us to confirm proper fit for your specific transmission and application.
Features
6-bolt mounting for Allison, Eaton/Fuller, Volvo/Mack, and Hino transmissions
Wire/cable mechanical shift operation
1-1/4" round output shaft with keyway
Intermittent torque rating up to 250 lb-ft (339 Nm); check application pages for actual torque ratings
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Greaseable pump shafts to reduce spline fretting and corrosion
Available in standard or low-profile housing
Tech Specs
- Intermittent Torque: 250 lb-ft / 339 Nm (check application pages for actual torque ratings)
- Shift Type: Wire/Cable, Mechanical
- Mounting Type: 6-Bolt
- Output Shaft Type: 1-1/4" Round with Key
- Transmission Compatibility: Allison, Eaton/Fuller, Volvo/Mack, Hino
- Output Power: 46-55 HP / 31-40 kW
- Shaft Power: 24 HP at 500 RPM; 48 HP at 1,000 RPM (18 kW at 500 RPM; 36 kW at 1,000 RPM)
Additional Information
Equivalent PTOs:
- BezaresPT1010XCN241RAView and buy
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

