The Chelsea 221ZLDAX-A3XD or 221ZLDAXA3XD is a 6-bolt power take-off assembly from the Chelsea 221 Series, engineered for low-speed, heavy-duty applications. It uses a wire/cable mechanical shift and mounts to transmissions from Allison, Eaton/Fuller, Volvo/Mack, and Hino. The 1-1/4" round output shaft with keyway delivers up to 48 HP at 1,000 RPM, with an intermittent torque rating up to 250 lb-ft (check application pages for actual torque ratings). Cast iron construction with tapered cone output bearings provides strong load-bearing capability over roller or needle-type alternatives. Greaseable pump shafts reduce spline fretting and corrosion. A low-profile housing option is available for tight under-cab clearances. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
6-bolt mounting pattern compatible with Allison, Eaton/Fuller, Volvo/Mack, and Hino transmissions
Wire/cable mechanical shift operation
1-1/4" round output shaft with keyway
Intermittent torque up to 250 lb-ft / 339 Nm (verify on application pages)
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Greaseable pump shafts to limit spline fretting and corrosion
Available in standard or low-profile housing to suit tight installation spaces
Tech Specs
- Intermittent Torque: 250 lb-ft / 339 Nm (check application pages for actual torque ratings)
- Shift Type: Wire/Cable, Mechanical
- Mounting Type: 6-Bolt
- Output Shaft Type: 1-1/4" Round with Key
- Transmission Compatibility: Allison, Eaton/Fuller, Volvo/Mack, Hino
- Output Power: 46-55 HP / 31-40 kW
- Shaft Power: 24 HP (500 RPM), 48 HP (1,000 RPM) / 18 kW (500 RPM), 36 kW (1,000 RPM)
- Housing Options: Standard or Low-Profile
Additional Information
Equivalent PTOs:
- BezaresPT1010XCN241SEView and buy
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

