281GDFJP-D5AC Chelsea PTO Assembly

The Chelsea 281GDFJP-D5AC or 281GDFJPD5AC is a 281 Series Power Take-Off Assembly built for automatic transmissions with a 10-bolt aperture, including Allison and Caterpillar applications. It uses hydraulic PowerShift (hot-shift) engagement and is rated for continuous operation at up to 390 lb-ft of continuous torque. The 281 Series is an evolution of the 280 Series, adding a ductile iron bearing cap that is 117% stronger than gray iron, an o-ring sealing configuration between the housing and bearing cap for improved clamp load, and an 80% thicker clutch-pack steel disc for reduced premature tooth wear. Nine speed ratios cover both low and high ranges. The optional Wet Spline Lubrication configuration delivers 7 to 10 times greater shaft life. Electronic Overspeed Control (EOC) and SmartStart are included features for equipment protection and reduced start-up shock. Call us to confirm proper fit for your specific transmission and application.

Features

10-bolt mounting aperture for Allison and Caterpillar automatic transmissions
Hydraulic PowerShift (hot-shift) engagement; rated for continuous operation
Series continuous torque rating up to 390 lb-ft (529 Nm)
Ductile iron bearing cap, 117% stronger than gray iron; o-ring seal between housing and bearing cap
80% thicker clutch-pack steel discs to reduce premature tooth wear
Nine speed ratios including low and high speeds; Wet Spline Lubrication option for up to 10x greater shaft life
SmartStart reduces start-up shock load; Electronic Overspeed Control (EOC) protects driven equipment

Tech Specs

• Mounting: 10-Bolt aperture
• Shift Type: Hydraulic PowerShift (hot-shift)
• Continuous Operation: Yes
• Series Continuous Torque: 390 lb-ft (529 Nm)
• Transmission Compatibility: Allison and Caterpillar automatic transmissions
• Output Types: SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
• Output Shaft Options: SmartStart Round Shaft (1-1/4" - 5/16" Key), 3/4" - 11T Pump Spline, SAE B (7/8" - 13T) Pump Spline, SAE C (1-1/4" - 14T) Pump Spline, DIN 5462 Pump Spline, 1410 Companion Flange, DIN 120 Flange, DIN 100 Flange
• Lubrication: Pressure Lube or Wet Spline options
• Speed Ratios: Nine (low and high ranges)
• Output Power: 56+ HP (51+ kW)
• Shaft Power: 37 HP at 500 RPM, 74 HP at 1000 RPM
• Typical Markets: Fire and Rescue, Truck Cranes, Pumper Cleaner, Refuse

Additional Information

Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices