Features
Hydraulic PowerShift (hot-shift) operation, compatible with 10-bolt automatic transmission apertures including Allison and Caterpillar
Ductile iron bearing cap, 117% stronger than gray iron, for increased durability under vibration
O-ring sealing configuration between housing and bearing cap improves clamp load and resists vibrational effects
Enhanced clutch pack with 80% thicker steel discs to resist premature tooth wear
Nine speed ratios available, spanning low- and high-speed ranges
Wet Spline Lubrication option provides 7 to 10 times greater shaft life; Electronic Overspeed Control (EOC) protects driven equipment
Tech Specs
- Mounting Type: 10-Bolt
- Shift Type: PowerShift (Hydraulic Hot-Shift)
- Continuous Operation: Yes
- Transmission Compatibility: Allison and Caterpillar automatic transmissions (10-bolt aperture)
- Continuous Torque (Series): 390 lb-ft (529 Nm) - verify actual rating on application pages
- Output Types (Series): SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
- Speed Ratios: Nine, including low and high speeds
- Lubrication: Pressure Lube or Wet Spline options
- Electronic Overspeed Control (EOC): Available
- SmartStart: Available for select applications
Additional Information

The Chelsea 281 Series is suited for demanding vocational markets including fire and rescue, truck cranes, pumper cleaner units, and refuse vehicles. The 281 Series builds directly on the proven 280 Series platform with targeted structural and sealing upgrades to handle the higher vibration signatures produced by modern engine designs. Hose is included with the unit. Refer to the 281/288 Series Parts List (HY25-2281-M1/US) and the 267/281/288/871/878 Series Owner's Manual for detailed installation and application guidance. Not sure this is your part? Give us a call.
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

